• ...you'll be pumped

SPEL Stormwater Quality Improvement Devices (SQIDs) See all Brands

spel environmental tanks

SPEL Environmental products provide water quality improvement solutions to meet the industry requirements of mining, petroleum, energy, defence, air, land and sea transport infrastructure, industrial, commercial and residential sites. With the wide product range, All Pumps can provide flexible treatment options to assist in achieving environmental compliance and aquatic ecosystem protection.

All Pumps has been manufacturing, selling, installing and supporting the SPEL range of products through Australia for many years.

SPEL StormChamber Installation

 
  • StormChamber
  • Ecoceptor

spel storm chamber

Benefits Over Other Storage Methods

  • Helps counter drought conditions by maintaining groundwater base flow to streams.
  • Superior load ratings for trafficable areas.
  • Maximised volume for efficient storage void ratio.
  • The least cost underground alternative.
  • The lowest installed cost of any modular storage technology.
  • Burial depths up to over 9m.
  • Layered installations possible for restricted surface area sites.
  • Superior design eliminates costly and complicated header manifold systems.
  • Can be utilised for conveyance in remote locations.
  • Recycled HDPE construction allows smaller excavation and decreased footprint.

Downloads

Benefits Over Similar Technologies

StormChamber Other Technology
Header pipe manifold in flow/out flow No Yes
AASHTO H-20 wheel load rating Exceeds by 4x Meets
End plates to purchase & install No Yes
Need for pre-treatment devices No Yes
Maximum height of fill 9.14m 2.44m
Require compacting stone base No Yes
Two & three layered installation Yes No
Number chambers required 40-45% fewer 40-45% more
Installed cost & time Significantly less Significantly more
Footprint Significantly less Significantly more
Excavation, stone, backfill Significantly less Significantly more
Compaction, grading & filter fabric Significantly less Significantly more

SPEL StormChamber Specifications

Storm Chamber storage = 2.12m3
Design storage capacity = 3.26 to 4.56m3
Length = 2.59m
Width = 1.52m
Height = 86.36cm

Ecoceptor

Independently tested and certified for hydraulic efficiency and the capture of gross pollutants. It seperates and captures gross pollutants, sediments and silt including light liquids which rise to the top of the chamber remaining in the seperation zone. The unique hydraulic treatment pipe is sized to suit specified flow rates.

The SPEL Ecocepte\or transfers the hydraulic force of incoming flows to produce a vortex cleaning action preventing pollutants from discharging the SPEL Ecoceptor can cater to flow rates from 0 - 240 LPS and can fit standard pipe sizes ranging from 100mm to 900 mm. Larger sizes available on request. The 1000 series is of polyethylene construction and larger models of fibreglass construction.

1000 Series Ecoceptor

1000 Series Selection Chart (Weight Approxmately 300kg each)
Model E.80/102222 E.80/103030 E.160/103030 E.160/103737 E.240/103737 E.240/104545
Maximum Flow LPS 80 80 160 160 240 240
Inlet mm 225 300 300 375 375 450
Outlet mm 225 300 300 375 375 450
Invert*Level mm 900
Overall* Height mm 2200
Outside Diameter mm 1900
Manhole Opening mm 900 x 600
Manhole Quantity 1
Max Silt Capacity Litre 1200
Max Hydrocarbon Capacity Litre 1200
Max Capacity Litre 3500

*Height does not include lid

2000 Series Ecoceptor

2000 Series Selection Chart (Weight Approxmately 350kg each)
Model E.80/202222 E.80/203030 E.160/203030 E.160/203737 E.240/203737 E.240/204545
Maximum Flow LPS 80 80 160 160 240 240
Inlet mm 225 300 300 375 375 450
Outlet mm 225 300 300 375 375 450
Invert*Level mm 900
Overall* Height mm 2200
Outside Diameter mm 1900
Manhole Opening mm 600 x 600
Manhole Quantity 1
Max Silt Capacity Litre 1200
Max Hydrocarbon Capacity Litre 1200
Max Capacity Litre 3500

*Height does not include lid

4000 Series Ecoceptor

4000 Series Selection Chart (Weight Approxmately 500kg each)
Model E.320/403737 E.320/404545 E.450/404545 E.450/405252 E.600/405252 E.600/406060 E.900/406060
Maximum Flow LPS 320 320 450 450 600 600 900
Inlet mm 375 450 450 520 520 600 600
Outlet mm 375 450 450 520 520 600 600
Invert*Level mm 1390
Overall* Height mm 3000
Outside Diameter mm 2000
Manhole Opening mm 600 x 900
Manhole Quantity 1
Max Silt Capacity Litre 2500
Max Hydrocarbon Capacity Litre 1500
Max Capacity Litre 7600

*Height does not include lid

6000 Series Ecoceptor

6000 Series Selection Chart (Weight Approxmately 700kg each)
Model E.900/606767 E.1200/606767 E.1200/607575 E.1200/609090 E.1200/609090
Maximum Flow LPS 900 1200 1200 1200 1400
Inlet mm 675 675 750 900 900
Outlet mm 675 675 750 900 900
Invert*Level mm 1690
Overall* Height mm 3300
Outside Diameter mm 2400
Manhole Opening mm 600 x 600
Manhole Quantity 2
Max Silt Capacity Litre 6000
Max Hydrocarbon Capacity Litre 2200
Max Capacity Litre 12500

*Height does not include lid

Contact Form